An Indo-Soviet experiment on an mhd generator test section at the Soviet U-02...
AbstractThis paper summarizes the major results of the joint Indo-Soviet experiment for testing the Indianmhd generator channel section, designed and fabricated at the Bhabha Atomic Research Centre,...
View ArticleDestabilization of calcia stabilized zirconia
AbstractCalcia stabilized zirconia (CSZ) is destabilized by Al2O3, SiO2 and TiO2 at elevated temperatures. The product of destabilization, termed partially destabilized zirconia (PDZ) has been found to...
View ArticleElectrical resistivity of plasma-sprayed titanium diboride coatings
AbstractPlasma-sprayed TiB2 coatings (50–600 μm thick) on alumina substrates have been developed and characterized. X-ray diffraction studies, thermal analysis and oxygen analysis of the coatings show...
View ArticleParticle morphology and size distribution of plasma processed aluminium powder
AbstractCommercially available aluminium powder has been processed in a thermal plasma jet. The processed powder has been characterized by scanning electron microscopy (SEM) for particle size and...
View ArticlePlasma sprayed alumina coatings for radiation detector development
AbstractConventional design of radiation detectors uses sintered ceramic insulating modules. The major drawback of these ceramic components is their inherent brittleness. Ion chambers, in which these...
View ArticleMultiobjective Optimization of Atmospheric Plasma Spray Process Parameters to...
AbstractAtmospheric plasma spraying is used extensively to make Thermal Barrier Coatings of 7-8% yttria-stabilized zirconia powders. The main problem faced in the manufacture of yttria-stabilized...
View ArticlePlasma-Sprayed Ceramic Coatings for Barrier Applications Against Molten...
Abstract Ceramic coatings are applied on engineering components for protecting them from large thermal load and hot corrosion. Choices of coating material for protection against hot corrosion by...
View ArticlePlasma Spray Deposition of Lanthanum Phosphate and Phase Structure of the...
AbstractPlasma-sprayed lanthanum phosphate coatings were prepared on stainless steel substrates at different input powers from 16 to 24 kW. Coatings were characterized by x-ray diffraction, scanning...
View ArticleRelative Potential of Different Plasma Forming Gases in Degradation of...
AbstractDegradation of Rhodamine B in aqueous solution was carried out with different microplasma medium generated from air, oxygen, nitrogen and argon gases at atmospheric pressure. Rhodamine B (RhB)...
View Article
More Pages to Explore .....